10-Strike LANState 4.5

10-Strike LANState description:

Monitor network hosts, shared resources, and traffic, get MAC addresses, scan TCP and UDP ports, and be notified when devices turn on or go down. Create network diagram and see your network's state in visual form at any time.
The program includes a number of features for administrators such as sending messages, shutting down and turning on remote computers, ping, name lookup, trace route, obtaining information on remote computers, creating reports, etc. LANState does not require installing any client software on the remote computers on your network.

Main features:
1. Modeling a local area network diagram in a visual mode and then saving the result as a map with images.
2. Monitoring hosts (ICMP ping and connecting to TCP port are supported).
3. Monitoring the usage of your shared resources by other users of the network.
4. Monitoring load of your network card (incoming/outgoing traffic).
5. Searching hosts by ICMP ping or scanning TCP ports.
6. Retrieving computer's network name by its IP address.
7. Notifying on events by playing a sound, writing to log, running program, sending e-mail, etc.
8. Performing actions on devices via the configurable context menu.
9. ICMP, TCP/IP, DNS, ARP, MAC, SNMP monitoring, etc.

10-Strike LANState 4.5 was released on Jun 20, 2009. The current version will run on Window. Additional system requirements for 10-Strike LANState include Network (NetBios, ICMP, TCP, UDP must be enabled in your firewall).

10-Strike LANState is a shareware. You will be able to use the evaluation version available for download during a limited period, after what you will have to buy the full version to continue to use 10-Strike LANState.

Size of 10-Strike LANState 4.5 download is less than 3280 Kb. DSL users will only need one minute to achieve the download, when 7 minutes may be required when using a 56k modem. (See below to download 10-Strike LANState 4.5).